Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Mẫu số: HLG-150H
Thương hiệu: Meanwell
Bao bì: Cái hộp
Năng suất: 20000pcs per month
Giao thông vận tải: Ocean,Land,Air
Xuất xứ: Quảng Đông, Trung Quốc
Hỗ trợ về: 5000pcs per month
Hải cảng: Shenzhen,Guangzhou,Hongkong
Hình thức thanh toán: T/T,Paypal,Money Gram,Western Union
Incoterm: FOB,CIF
HLG-150H Meanwell không thấm nước LED cung cấp điện
Mô tả sản phẩm
Không thấm nước 150W đơn đầu ra chuyển mạch cung cấp điện , mô hình sau đây sử dụng rộng rãi với Iseeled `s dẫn đèn, HLG-150 H - 12, HLG-150 H -1 5, HLG-150 H -24, vv một số mô hình khác cho đèn đặc biệt với điện áp đầu vào khác nhau.
HLG-150 H -12 Trống: Xếp hạng IP67. Cáp cho kết nối I / O.
HLG-150 H- 12A: Xếp hạng IP65. Điện áp đầu ra và mức dòng liên tục có thể được điều chỉnh thông qua chiết áp bên trong.
HLG-150 H -12B: Xếp hạng IP67. Mức dòng liên tục có thể điều chỉnh thông qua cáp đầu ra với tín hiệu hoặc tín hiệu PWM hoặc tín hiệu PWM 1 ~ 10Vdc hoặc PWM.
HLG-150 H -12D (tùy chọn): IP67 được xếp hạng. Chức năng làm mờ hẹn giờ, liên hệ với MEAN WELL để biết chi tiết.
Model |
HLG-150H-12 |
HLG-150H-15 |
HLG-150H-24 |
|
Output |
DC VOLTAGE |
12V |
15V |
24V |
CURRENT ADJ. RANGE |
Can be adjusted by internal potentiometer A type only |
|||
7.5-12.5A |
6-10A |
3.8-6.3A |
||
RATED POWER |
150W |
150W |
151.2W |
|
VOLTAGE ADJ. RANGE |
10.8-13.5V |
13.5-17V |
22-27V |
|
Input |
Voltage Range |
90-264VAC 127-370V DC |
||
Frequency Range |
47-63Hz |
|||
POWER FACTOR |
PF>0.98/115VAC, PF>0.95/230VAC, at full load (Please refer to "Power Factor Characteristic" curve) |
|||
Efficiency(Typ.)(230Vac) |
92% |
92.5% |
93.5% |
|
AC CURRENT (Typ.) |
1.7A / 115VAC 0.75A / 230VAC |
|||
INRUSH CURRENT(Typ.) |
COLD START 75A/230VAC |
|||
LEAKAGE CURRENT |
<0.75mA / 240VAC |
|||
PROTECTION |
OVER LOAD |
95~ 108% |
||
Protection type : Constant current limiting, recovers automatically after fault condition is removed |
||||
SHORT CIRCUIT |
Constant current limiting, recovers automatically after fault condition is removed |
|||
OVER VOLTAGE |
14-17V |
18-21V |
28-34V |
|
Protection type :Shut down O/P voltage, re-power on to recover |
||||
OVER TEMPERATURE |
100 ℃ up or less10 ℃ (RTH2) |
|||
Protection type : Shut down and latch off o/p voltage, recovers automatically after temperature goes down |
||||
Environment |
WORKING TEMP. |
-40 ~ +70 ℃(Refer to output load derating curve) |
||
WORKING HUMIDITY |
20 ~ 95% RH non-condensing |
|||
SAFETY |
SAFETY STANDARDS |
UL8750, CSA C22.2 No. 250.0-08, EN61347-1, EN61347-2-13 independent IP65 or IP67, J61347-1, J61347-2-13 approved ; design refer to UL60950-1, TUV EN60950-1 |
||
WITHSTAND VOLTAGE |
I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC |
|||
ISOLATION RESISTANCE |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC / 25 / 70% RH |
|||
EMC EMISSION |
Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2 Class C ( 50% load) ; EN61000-3-3 |
|||
EMC IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV), criteria A |
|||
Others |
MTBF |
192.2K hrs min. MIL-HDBK-217F (25℃ ) |
||
DIMENSION |
228*68*38.8mm (L*W*H) |
|||
PACKING |
1.15Kg; 12pcs/14.8Kg/0.8CUFT |
|||
Note |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltages. Please check the static characteristics for more details. 5. Type A only. 6. Safety and EMC design refer to EN60598-1, CNS15233, GB7000.1, FCC part18. 7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time. 8. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 9. Refer to warranty statement. |
1. Tất cả các thông số KHÔNG được đề cập cụ thể được đo tại đầu vào 230VAC, tải trọng định mức và 25 của nhiệt độ môi trường xung quanh. chú thích
2. Ripple & tiếng ồn được đo tại 20MHz băng thông bằng cách sử dụng một cặp dây xoắn đôi 12 "kết thúc với một tụ điện song song 0,1uf & 47uf.
3. Dung sai: bao gồm dung sai thiết lập, quy định đường dây và quy định tải.
4. Có thể cần có nguồn gốc trong điện áp đầu vào thấp. Vui lòng kiểm tra các đặc tính tĩnh để biết thêm chi tiết.
5. Chỉ loại A.
6. Thiết kế an toàn và EMC tham khảo EN60598-1, CNS15233, GB7000.1, FCC part18.
7. Thời gian thiết lập được đo tại thời điểm bắt đầu lạnh. BẬT / TẮT nguồn điện có thể dẫn đến tăng thời gian cài đặt.
8. Nguồn điện được coi là một thành phần sẽ được vận hành kết hợp với thiết bị cuối cùng. Vì hiệu suất EMC sẽ bị ảnh hưởng bởi cài đặt hoàn chỉnh, các nhà sản xuất thiết bị cuối cùng phải tái chứng nhận Chỉ thị EMC về cài đặt hoàn chỉnh lần nữa.
9. Tham khảo báo cáo bảo hành.Danh mục sản phẩm : Phụ kiện LED > Cung cấp điện chống thấm Meanwell
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.